The quick version
- The HiSmith MAX 200W Premium is a floor-standing machine with a 200 W motor, a 3.3 to 20 cm stroke and 18 kg of frame behind it.
- Its stroke is the longest of the three floor-standing HiSmiths compared below, and the angle adjusts through 180 degrees.
- Control comes by app, remote (20 m range) or wired controller, and KlicLok attachments click straight on.
- At 18 kg it suits a machine you set up and leave in place. The Premium weighs 11.5 kg if you want something lighter.
- Start at the shortest stroke and the lowest speed. Depth comes from where the machine sits, not from the dial.
- It ships from inside Australia by Australia Post 1 to 4 business days, in plain packaging.
What Is the HiSmith MAX 200W Premium?
It is a floor-standing thrusting machine built on chromed steel with a 200 W motor, aimed at the buyer who wants a long stroke and a frame that stays planted. Everything else follows the HiSmith pattern: a base, an arm and rod, a KlicLok attachment on the end, and controls that run from a wired pad to the app.
If any of that is new, the first-session guide covers the settings from scratch.
How Does the MAX Compare With the Premium and Servok?
The MAX has the longest stroke and the heaviest frame of the three, and the Premium is the lightest. The Premium also reaches 240 strokes per minute to the MAX's 220, so the MAX is not the faster machine.
The Servok is the one that changes stroke depth from the app or remote without stopping. The Premium vs Servok guide goes through that choice in full.
How Big Is It, and Where Does It Live?
At 18 kg the MAX is a machine you assemble once and leave in a corner, not one you carry to the bedroom each night. The box measures 61 x 29 x 29 cm, and the frame folds down when you want it out of sight.
The kit has the main body, two leg bases, four leg rods and a thrusting rod, plus two Allen wrenches, the power adapter and a carry bag. Setup is quick, and the wrenches are in the box, so there is no trip to the shed.
Put a rubber mat under the legs on tiles or floorboards. The stability guide covers what actually holds a machine still.
What Does a 20 cm Stroke Change?
Range, not intensity. The same machine covers a short, gentle stroke at the 3.3 cm end and a long, slow one at the 20 cm end.
Stroke length sets how far the rod travels on each pass, and the 180 degree angle adjustment lets you aim the rod properly for each position. Depth itself still comes from where the machine sits, so move the machine before you touch the dials. Long strokes run slower than short ones on any thrusting machine, so pair them on purpose.
For a first session, start at the 3.3 cm end, run the lowest speed, and lengthen the stroke in small steps with a minute between each. The thrust depth guide and the stroke adjustment guide explain how the two settings work together.
How Do You Control It?
Three ways: the HiSmith app, a remote with a 20 m range, or the wired controller, with a manual mode as well. The app adds sound sync, custom patterns and shared settings.
Handing your partner the remote is the simplest way to make it a shared thing, and the long-distance control guide covers app play across different houses. For setups built around two people, the couples guide has the positions.
What Goes on the End, and What Is Safe With It?
A 21 cm silicone dildo is in the box, and anything on the KlicLok mount fits. Before the first session, run through this list:
- Lube: water-based only with a silicone attachment, because silicone lube can damage silicone.
- Anal use: only attachments with a flared base, because the base is what stops it going further in than you intend.
- Numbing products: skip them, because feeling what is happening is how you know when to stop.
- The stop: run the machine clothed first and practise switching it off, so finding the stop is automatic before you need it.
- Fixings: check every leg rod and bolt is tight before each session, because a loose joint is what moves under load.
- Water: keep it away from the motor and the controller, and wipe the body with a barely damp cloth.
- Pain: stop on any sharp pain, and see a doctor if there is any bleeding.
Afterwards, wash the attachment in warm water with mild soap and dry it fully before storing. The cleaning guide has the detail by material, and the anal attachments guide covers what to put on the rod for anal play.
Who Should Buy the MAX, and Who Should Look Elsewhere?
The full lineup, with every model side by side, is in the sex machines collection, and the HiSmith machines and accessories collection has the attachments for the rod.
Frequently Asked Questions
Is the MAX 200W the same machine as the Premium?
No. The MAX has a 200 W motor, a 3.3 to 20 cm stroke and weighs 18 kg, against 100 W, 3 to 15 cm and 11.5 kg for the Premium. The Premium (Remote and App) review covers that machine in full.
What else can I put on the rod?
Anything that fits the KlicLok mount, from dildos to strokers. The KlicLok attachments guide explains what fits and how the adaptors work.
How loud is it?
Any thrusting machine is a mechanical hum rather than silence, and it climbs with speed. A mat under the legs takes the rattle out of the floor, which matters most through a share-house wall. The quiet machines guide rounds up the quietest options, and the maintenance guide fixes a machine that has got louder over time.
What power does it need?
It runs from the power adapter and plug in the box. The power supply guide explains what to check on any mains machine before you plug it in.
Can I pay with Afterpay or Zip?
Yes, both are available at checkout. The financing guide explains how Afterpay works on a machine.
Why Buy From Pleasing Strings
Orders ship from inside Australia in plain, unbranded packaging with a discreet billing descriptor, and HiSmith machines travel by Australia Post 1 to 4 business days. Shipping is free over $109, and Afterpay and Zip are both available. Machines carry a 12-month warranty with your Australian Consumer Law rights on top (the warranty guide has the detail), and sales@pleasingstrings.com.au answers questions before you order.
Related guides
- Which HiSmith model should you actually buy?
- HiSmith Premium vs Servok: which machine to buy
- Setting up your first HiSmith machine, step by step
Last updated: 16 November 2026



