Overview
The Maia Toys KENNEDI is a triple-action rabbit vibrator engineered to deliver simultaneous vaginal, clitoral, and anal stimulation through a dual-motor system. The oscillating shaft works in tandem with a bunny-shaped clitoral arm and a rear anal teaser, giving each zone independent, targeted attention. Constructed from liquid silicone and rated IPX7, the KENNEDI is fully submersible and body-safe throughout.
Key Features
- Triple-action stimulation — vaginal, clitoral, and anal zones addressed simultaneously
- Dual-motor drive powers both the oscillating shaft and the external stimulator independently
- 25 combined settings per motor — 5 variable oscillation/vibration patterns each with 5 intensity levels
- Super-soft liquid silicone construction — body-safe and skin-friendly
- IPX7 waterproof rating — fully submersible for use in water
- USB magnetic recharge via included charge cable
- 90-minute charge time delivers up to 60 minutes of run time
At a Glance
Liquid Silicone
Material
23.5 cm total / 12.7 cm insertable
Dimensions
25 settings × 2 motors
Functions
USB Magnetic Recharge
Power Source
Full Specifications
- Total length: 23.5 cm (9.25 inches)
- Insertable length: 12.7 cm (5 inches)
- Diameter: 4.5 cm (1.75 inches)
- Weight: 340 grams
- Material: Liquid Silicone
- Waterproof rating: IPX7 (fully submersible)
- Motors: Dual
- Patterns per motor: 5 variable patterns
- Intensity levels per motor: 5
- Total settings per motor: 25
- Charge time: 90 minutes
- Run time: 60 minutes
- Charging method: Magnetic USB cable
- Colour: Blue
Operating Instructions
Power: Press and hold the centre Power Button to turn the unit on or off. The Power Button will flash upon startup.
Shaft Control (A-Button): Hold the A-Button for 3 seconds to activate oscillation. Tap the A-Button to step through the 5 available patterns. Use the + or − buttons to raise or lower intensity.
Stimulator Control (B-Button): Hold the B-Button for 3 seconds to activate the clitoral stimulator. Tap the B-Button to step through the 5 vibration patterns. Use the + or − buttons to adjust intensity.
Charging: Connect the magnetic charge cable to the toy's charging port. Once fully charged, the power button indicator light will remain solid rather than flashing.
